MARA Compact S Suppressor – maximum efficiency in a compact size
MARA Compact S is designed for those who value compact size and low weight without sacrificing performance. The new gas relief system reduces internal pressure and avoids propellant overpressure, so the action cycles reliably and gases do not blow into the shooter’s face.
Technologies
- Spiral internal contours reduce the high velocity of gases and create vortex flows.
- Part of the gases is vented through the moderator’s front cap – this helps suppress flash and flame.
- ZeroOvergas – ensures proper cycling on semi-automatic carbines.
- Reduced muzzle rise and recoil impulse thanks to vortex elements.
Materials and finishes
- Body – titanium. The base version is supplied sandblasted, oiled and baked – a uniform matte gray finish without glare that does not reveal the shooter.
- Optional Cerakote finish: Black H-146 “Black Graphite”, Olive H-236 “O.D. Green”, Coyote H-258 “Chocolate Brown”. Depending on availability, similar shades may be used: HIR-146 “GEN II Graphite Black”, H-267 “MagPul™ Flat Dark Earth”, H-235 “Coyote Tan”, H-240 “Mil Spec O.D. Green”, H-232 “MagPul™ O.D. Green”.

Ergonomics
The body features an engraved traditional Ukrainian ornament. It serves both as a design accent and as reliable texturing for easy installation and removal on the muzzle thread.
Compatibility and recommended use
- Calibers – .223 Remington, 5.56×45 NATO, 5.45×39.
- Platforms – AR-15, AK-74 and compatible systems with the appropriate muzzle thread.
- Recommended barrel length – from 14″. On shorter barrels, partial blow-by of hot gases and flash is possible.
Key advantages
- Compact dimensions and low weight.
- Peak sound reduction up to -31 dB – in typical conditions may allow shooting without additional hearing protection.
- Effective flash and flame suppression.
- Reduced back pressure – stable cycling of the action.
- Titanium body – high corrosion resistance and fast heat transfer.
- Non-glare matte base finish or optional Cerakote.
Important
Actual sound reduction depends on barrel length, ammunition type, measurement conditions and the condition of the firearm. Even with significant peak reduction, use hearing protection according to your comfort and safety.
Specifications
| Purpose | Sound suppressor for semi-automatic carbines and automatic rifles |
| Calibers | .223 Remington, 5.56×45 NATO, 5.45×39 |
| Material | Titanium |
| Construction | Spiral gas channels, front venting unit, low internal pressure system, threaded gas diffuser. |
| Finish | Base – sandblasting + oiling + baking; optional Cerakote |
| Firing modes | Semi-auto and full-auto |
| Peak sound reduction | Up to -31 dB |
| Recommended barrel length | From 14″ |
| Compatible platforms | AR-15, AK-74 and similar |
FAQ
Will it fit an AR-15 chambered in 5.56×45?
Yes, the device is fully compatible with any AR-15 in 5.56×45 and .223 Rem.
Can it be used on an AKS-74U?
Yes, please make sure to mention this in the order comments.
How does it perform on short barrels 10.5″ or 12.5″?
It can be used, but performance is lower – partial blow-by of hot gases and flash is possible. Best results are with 14″ barrels and longer.
| Weight | 280 g |
|---|---|
| Dimensions | 130 × 41 mm |
| Barrel thread | |
| Color | |
| Coating | Cerakote, MicroBlast |
| Brand | |
| Caliber | |
| Caliber group | |
| Hull material | |
| Elements material | |
| Product type | |
| Suppressor type | |
| Acoustic Effecient (дБ) | |
| Гарантія |
Українська
Русский










Be the first to review “MARA Compact S”
You must be logged in to post a review.